CGPVV - C905 RBX

  • MSDS: CGPVV
  • Manufacturer: SANCAP ABRASIVES INC
  • Product Name: C905 RBX
  • National Stock Number: 5350-00N083199
Product Identification

Product ID:C905 RBX
MSDS Date:09/05/1991
FSC:5350
NIIN:00N083199
MSDS Number: CGPVV

Responsible Party
SANCAP ABRASIVES INC
16123 ARMOUR ST NE
ALLIANCE, OH 44601
US

Emergency Phone: 800-433-6663

Info Phone: 800-433-6663

Preparer: G. KITTLESON

Cage: SANCA

Contractor
SANCAP ABRASIVES/ALLIANCE, OH 44601

Cage: SANCA

Ingredients

ALUMINUM OXIDE (MFR INVALID CAS #1349-28-1)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 40%

OSHA PEL 15 MG/M3(TDUST)(MFR)

ACGIH TLV: 10 MG/M3 (MFR)


COTTON; (COTTON CLOTH)

Fraction By Weight: 35%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)


PHENOL FORMALDEHYDE RESIN; (RESIN POLYMER)

CAS: 9003-35-4

Fraction By Weight: 25%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE COUGHING AND
SHORTNESS OF BREATH. SKIN: MAY CAUSE ABRASIONS. EYE: DUST IS AN EYE
IRRITANT. CHRONIC: MAY AFFECT BREATHING CAPACITY.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . INHALATION:
REMOVE TO FRESH AIR AND OBTAIN MEDICAL ASSISTANCE. INGESTION:
OBTAIN MEDICAL ATTENTION AS NEEDED. EYES: WASH WITH LARGE AMOUNTS
OF W ATER FOR AT LEAST 15 MINUTES.

Fire Fighting

Extinguishing Media:WATER, CARBON DIOXIDE OR OTHER ACCEPTABLE MEDIUM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Accidental Release

Spill Release Procedures:USE ORDINARY PRECAUTIONS FOR DUSTS AND
PARTICULATES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:BECAUSE OF THE POSSIBILITY OF
ABRASIONS USE NORMAL HAND, FACE AND BODY PROTECTION.
Other Precautions:DO NOT USE WITHOUT ADEQUATE VENTILATION (OSHA 29 CFR
1910.94) (OSHA 29 CFR 1910.1000) (OSHA CFR 1910.213) (OSHA
1910.243).

Exposure Controls

Respiratory Protection:AS NEEDED, USE NIOSH APPROVED DUST RESPIRATOR
(OSHA CFR 1910.134).
Ventilation:USE ADEQUATE LOCAL AND MECHANICAL EXHAUST VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
RECOMMEND STANDARD FACE, HAND & EYE PROTECTION AT ALL TIMES
(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PROT EQUIP: WHEN USING ABRASIVE BELTS, DISCS & EQUIPMENT. HEARING
PROTECTION AS NEEDED IN ACCORDANCE WITH OSHA 1910.215.

Chemical Properties

Appearance and Odor:GRANULAR WHITE TO LIGHT BROWN; NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:AVOID USING PRODUCT IN TOTALLY
UNVENTILATED AREAS.
Hazardous Decomposition Products:NONE.

Disposal

Waste Disposal Methods:DISPOSE OF IN APPROVED LANDFILLS IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.